Champion Hanger Installation Guide | TUTORIALS

Welcome to Champion Hanger!

 

Hello, Champion!

Congratulations on receiving your unique medal display from Champion Hanger. We are thrilled to help you showcase your hard-earned victories in the perfect way.

This page provides you with a detailed, step-by-step guide to securely mount your new medal hanger on the wall. You can watch our quick tutorial video or follow the written instructions below.

Let's get started!

 

Quick Installation Video Guide

 

Detailed Step-by-Step Installation Guide

 

Before you begin, please ensure you have the following tools and parts ready:

  • Your Champion Hanger product (including the hanger, screws, and wall plugs)

  • A measuring tape

  • A pencil

  • A power drill (optional)

  • A hammer

Step 1: Attach the BIBs Holder

  • Attach the two BIBs holders (for your race numbers) to the two holes on each side of the wooden frame.

  • Use your fingers or a small tool to tighten the metal ring.

Step 2: Screw in the Hanging Hooks

  • Use a screwdriver to screw the two D-ring hanging hooks onto the back of the wooden frame.

  • Securely tighten the screws into the pre-drilled holes at the top corners.

Step 3: Mark Your Wall

  • Use your measuring tape to accurately measure the distance between the two hanging hooks on the frame.

  • Using a pencil, mark two corresponding points on your wall that match this exact distance.

  • Note: The marks must be level and accurate to ensure your hanger hangs straight.

Step 4: Drill the Holes

  • Use a power drill to make two holes at the marked points on the wall.

  • The depth of the holes should match the length of the white wall plugs provided with your product.

Step 5: Insert the Wall Plugs

  • Gently tap the wall plugs into the drilled holes with a hammer.

  • Make sure the wall plugs are firmly and securely in place.

Step 6: Insert the Screws

  • Use a screwdriver to screw the provided screws into the wall plugs.

  • Leave about 1 cm (approximately 0.4 inches) of the screw sticking out to hang the frame.

Step 7: Hang the Frame

  • Finally, carefully lift the frame and hang the two D-ring hooks onto the two screws on the wall.

  • Adjust slightly to ensure the frame is straight and secure.

You're all set! Now you can proudly display your medals and race numbers on your Champion Hanger.